Multipoint Sampler and Doser - INNOVA 1303
Comprehensive air-exchange analyses and ventilation-efficiency checks are easily performed using the dosing facilities of the INNOVA 1303. Tracer-gas is delivered through tubing to 'label' the air in up to 6 different locations, each being up to 50 metres away; the amount of tracer-gas delivered is automatically calculated by the INNOVA 1303. The 'labeled' air is then sampled again using the sampler system of the INNOVA 1303, and delivered to the INNOVA 1412 for analysis.
Multipoint Sampler - INNOVA 1309
The INNOVA 1309 has 12 inlet channels, each with a solenoid valve and a tube-mounting stub on the front-plate. Connected to the INNOVA 1412 the system is suitable for multi-point monitoring of chemical processes. INNOVA 1309 connected to the INNOVA 1313, gives a system suitable for monitoring of multi-vessel fermentation processes. Each sampling point can be located up to 50 m away and external pumps are available for distances up to 300 m.
Fermentation Monitor - INNOVA 1313
The Fermentation Monitor - INNOVA 1313 is designed for monitoring fermentation processes. The INNOVA 1313 simultaneously measures the concentrations of Oxygen ( O2 ), Carbon Dioxide ( CO2) and Hydrocarbons, such as Ethanol, Methanol and Methane. It can be integrated into permanent fermentation monitoring systems together with 3 multiplexers, enabling samples from up to 36 sampling points.
Photoacoustic Multi-gas Monitor - INNOVA 1314
The Photoacoustic Multi-gas Monitor - INNOVA 1314 is mounted in a 19" rack and performs quantitative analysis of up to 5 different components and water vapour in gas mixtures. It compensates for water vapour interference and can cross compensate for interference of other measured gases. The Photoacoustic Multi-gas Monitor - INNOVA 1314 has a linear response over a wide dynamic range and has high stability which only makes calibration necessary a few times a year.
Multi Gas Monitor - INNOVA 1316
The Multi Gas Monitor - INNOVA 1316 is designed to measure up to 5 gases including O2. The INNOVA 1316 can be configured for different measurement situations by a selection of modules and sensors. With one module the INNOVA - 1316 measures the concentrations of Carbon Monoxide (CO), Carbon Dioxide ( CO2) and Hydrocarbons, such as Hexane or Propane. Combined with optional sensors, Oxygen (O2) and one of the following Hydrocarbons; Hydrogen Sulphide, Sulphur Dioxide or Nitric Oxide.
Photoacoustic Field Gas-Monitor - INNOVA 1412
The Photoacoustic Field Gas-Monitor - INNOVA 1412 has a linear response over a wide dynamic range and high stability which makes calibration necessary only a few times a year. The Photo-acoustic Field Gas-Monitor - INNOVA 1412 is a highly accurate, reliable and stable quantitative gas monitoring system. The measurement principle is based on the photoacoustic infra-red detection method. This means that the Photoacoustic Field Gas-Monitor - INNOVA 1412 can measure almost any gas, which absorbs infra-red light.
Get Adobe acrobat 6.0 (UK)
Tel.: +45 44 20 01 00 • Fax.: +45 44 20 01 01 • E-mail: innova@innova.dk